Static Glands - Axial (Face Seal)

Back to O-Ring Gland Design

O-ring dimensions

gland_1.jpg (8780 bytes) gland_2.jpg (10598 bytes)
O-Ring Size O-Ring Gland Actual %            Groove Width Groove
AS568A- Cross Section Depth Squeeze Squeeze Liquids Gas/Vacuum Radius
004 to 050 .070" +/-.003 .050 to .054 .013 to .023 19 to 32 .101 to .107 .084 to .089 .005 to .015
102 to 178 .103" +/-.003 .074 to .080 .020 to .032 20 to 30 .136 to .142 .120 to .125 .005 to .015
201 to 284 .139" +/-.004 .101 to .107 .028 to .042 20 to 30 .177 to .187 .158 to .164 .010 to .025
309 to 395 .210" +/-.005 .152 to .162 .043 to .063 21 to 30 .270 to .290 .239 to .244 .020 to .035
410 to 475 .275" +/-.006 .201 to .211 .058 to .080 21 to 29 .342 to .362 .309 to .314 .020 to .035

Note: The above chart and information is intended for reference use only.  
Gland design has many variables to consider such as temperature, pressure, range, performance requirements.. 

Back to O-Ring Gland Design

Material Selection Guide (Order Here) | 
O-Rings Explained  | O-Rings Sizing Chart | 
 | Fluid Compalibility Guide | O-Ring Failure Analysis | 
Home | Contact Us | Request a Quote |

1998-2003  allorings.com Inc.   All rights reserved.